I have a fritz box 7390 , new firmware , if I want to increase the stability ,or inp , (e.g) , rthe Belgacom line is out (the stabililty is also awful) Do you have such problems.
Thanks in advance
Fritzbox 7390 and new firmware
-
fryelectro
- Elite Poster
- Berichten: 1862
- Lid geworden op: 14 dec 2005, 11:58
- Locatie: 03BOO0
- Uitgedeelde bedankjes: 363 keer
- Bedankt: 174 keer
-
Provider
I don't have stability issues (I do see some Errors (ES)at the "DSL Telephone switch" which I've never seen before) with the new firmware BUT since I applied it, a few hours later I was forced back to my provisiong profile of 30/6 instead of 70/6... It is not sure that the firmware upgrade has something to do with it, but in the three years I am connected to VDSL2, I was never set on a lower profile....
Edpnet VDSL XL - 100/35 Fritz!Box 7530
Orange Go Extreme
Orange Go Extreme
For my own part the profile in snr was doing "yoyo" . In order to stabilise I did what I always did and then no connxion at all . As a result two interventions of a technician and two ports out , so I go back to the old firmware and no problem anymore
So I think there is a problem !
So I think there is a problem !
-
philippe_d
- Moderator
- Berichten: 18369
- Lid geworden op: 28 apr 2008, 11:22
- Locatie: Waregem
- Uitgedeelde bedankjes: 1001 keer
- Bedankt: 3720 keer
- Recent bedankt: 20 keer
-
Provider
If you really want some help from the Forum community, you should give a few more details of your xDSL subscription, e.g.
- - are you ADSL2+ or VDSL2 ?
- what is your modem sync speed?
- line values (attenuation, snr)?
- last but not least: how does your internal wiring look like (starting from the Belgacom wallplate, splitter/filter, etc ..)
VoIP: EDPnet (gratis vaste lijn), Sipgate.de, Sipgate.co.uk, MegaVoip.
Provider: EDPnet Fiber XS (150/50 mbps down/up).
Modem/Router: Fritz!Box 5590 Fiber, OS 8.03, Fritz!SFP GPON aangesloten op Proximus ONTP.
Telefoon centrale: Euracom 181 achter FritzBox So. 3 Fritz!DECT toestellen
TV: Telenet CI+, Fritz!DVB-C.
Provider: EDPnet Fiber XS (150/50 mbps down/up).
Modem/Router: Fritz!Box 5590 Fiber, OS 8.03, Fritz!SFP GPON aangesloten op Proximus ONTP.
Telefoon centrale: Euracom 181 achter FritzBox So. 3 Fritz!DECT toestellen
TV: Telenet CI+, Fritz!DVB-C.
So
I am in VDS2, distance from the ROP followin g Hierzo : 354 m , followin Belgacom 498 m
You'll find here after all my data
Sorry but my Nederlands is niet goed
The problems came when I did the upgrade and I want to stabilise my line
Thank you for your help
PS no problem (physical problem on my line) but a "perturbating neighbour" normally SNR equal to to 20 dB but I have this problem.
All the data are very good except this
I am in VDS2, distance from the ROP followin g Hierzo : 354 m , followin Belgacom 498 m
You'll find here after all my data
Sorry but my Nederlands is niet goed
The problems came when I did the upgrade and I want to stabilise my line
Thank you for your help
PS no problem (physical problem on my line) but a "perturbating neighbour" normally SNR equal to to 20 dB but I have this problem.
All the data are very good except this
- Bijlagen
-
- fritzbox 30 apr 2013.jpg
- (106.92 KiB) 1637 keer gedownload
-
snakeboots
- Plus Member
- Berichten: 196
- Lid geworden op: 10 dec 2006, 15:45
- Locatie: Vottem
- Uitgedeelde bedankjes: 2 keer
Here also with the new firmware two VDSL ports out of service by playing with the increase the stability function. Now I'm using my b-box2 in bridge mode and all works smoothly.
